Beading for Beginners: What Tools Do I Need?

I think that beading is a great hobby because it is very scalable. What I mean is, that you can start very simple, with no tools at all, except a pair of scissors. Then as you get more involved, you can add more tools and supplies as needed. It is not necessary to go out and buy a whole bunch of tools and things that you don't need or don't know how to use.

I have defined different levels of beading, the tools and supplies that you need, and what you can make with the tools

Simple is a great way to start dabbling with beading. All you need are beads in your favorite colors and stretch cord. A ruler is helpful so that you know how many beads to string on and you will need scissors to trim the stretch cord after you tie a knot. Then you will be able to string a fun bunch of stretch bracelets. It's a great way to spend a few hours with girlfriends, daughters, and sisters.

Beginners - there is no need to be intimidated, beading is fun, so please enjoy it!

There is a lot you can do with beads but take it slow and learn a little bit at a time. To start, I would recommend just a few basic things. It seems like a long list, but most of these items are relatively inexpensive and will make your beading experience easier and more enjoyable.

Bead stoppers - these are are springy clamps that you attach to one end of your string so that beads don't fall off the back end while you are stringing on the beads

Crimp Beads - these are little tubular beads. When compressed with a crimp tool, they will secure the clasp on your bracelet or necklace

Crimp Tool  - compresses crimp beads, we have illustrated crimping instructions on our website, but most of the time there are instructions on the packaging.

Bead Mat - this will pad your work space and keep beads from rolling off onto the floor.

Bead Board - this is a board with a U-shaped groove. Lay your beads in the groove to design your piece before stringing. This allows you to arrange and rearrange the beads until you are happy with the design.

Flexible Beading Wire - this is a quality, multi-purpose stringing materials that is great for stringing bracelets, necklaces, anklets and even making earrings. When using flexible beading wire, you will need crimps and a crimp to attach clasps and findings.

Findings (clasps, jump rings, crimps, etc.) - this term refers to clasps jump rings, ear wires and mainly metal components

Flush Cutter - needed for trimming excess stringing material

Chain Nose Pliers - just a handy tool to have to give you an extra pair of hands or help with picking up items.

Last, but not least - you will need BEADS!!! There are so many to choose from, half the fun is hunting for beads in uniques shapes and colors.

Beading blogs, books and magazines are a great way to get ideas and teach you to visualize how beads will look together as you are designing.

In a future blog post, I will talk about more advanced skill levels - Intermediate, Advanced & Obsessed!

Breast Cancer Awareness Book Mark

Beaded bookmarks are completely customized by the beads and the charms that you choose, so you can make each one truly unique.

This design features beaded dangles at the end of satin ribbon. The satin ribbon is flat so it fits perfectly between the pages of a book. The book mark is decorated with beaded dangles that are attached to a large ring that connects the beaded dangles to the ribbon. You can have fun combining different types of ribbon with different combinations of beads and charms.

We have created this design for Breast Cancer Awareness Month, but you can adapt this beaded book mark design for any occasion. They are great stocking stuffers and wonderful gifts for teachers & book worms.

Simple instructions to create this beaded book mark are available on our website with detailed photographs. All you need to know is how to use crimp beads and a crimp tool.

To purchase products featured in this blog post, use the following links:

FlexRite Beading Wire
Sterling Silver Crimp Beads
Czech Glass Beads
Pink Designer Bead Mix
Silver Pewter Hammered Ring
Vertical Hole Alphabet Beads
Pewter Charms

Click here for more ideas for Bead projects for Breast Cancer Awareness

Look for our beads on TV... Extreme Makeover Home Edition

We have been anxiously waiting for this episode to air so we can see how the EMHE designers have incorporated our beads into the Lutz Family's new home. We sent them all types of beads and we can't wait to see what they have done!

After the show airs, we will post photographs, so stay tuned!

Watch on ABC, Sunday, October 3, 2010, 8/7 central.

After you see this episode, let us know what you think (post your comments)! Thanks!!!

Bead Bee in Real Simple Magazine

Pick up the Fall 2010 of Real Simple Family Magazine for great party favor ideas for all of your fall and holiday festivities! Bead Bee's bead kits, featured in this issue (p.24), are perfect for creating personalized gifts and party favors such as bracelets, necklaces, book marks or key chains.

To shop for the bead kits seen in Real Simple Magazine enter keyword Real Simple Bead Kits into the BeadBee.com search bar, or click here



Blog readers get an extra 10% off our Real Simple Bead Kits! Use coupon code: realsimple (Offer expires on December 31, 2010)

A Simple Beaded Keychain for Every Skill Level

Hand made beaded keychains are simple to make and are a great activity for both kids and adults. Many people have created them as fundraisers or as gifts. All you need are large hole beads and alphabet bead beads to spell out a special message. No tools are necessary except for a pair of scissors.

Click here for detailed illustrated directions on How to Make a Beaded Key Chain

A Heritage of Inspiration: Creating Jewelry with Czech Glass Beads

Hello Everyone!

For this blog, I wanted to focus on the beautiful Czech Glass Beads that you can find at Bead Bee. The reason I'm so interested in these beads is because they're linked with my heritage, and I wanted to find out a little bit of history on them.

In essence, Czech Glass Beads were made from the ideas and demands of people all over the world. In the mid 1800s, Czech "sample men", as they called them, would travel the world trying to figure out what kinds of beads people wanted. They took back their notes and sketches to their home factories where the beads were produced. After a while, technological advances made it possible for Bohemia to mass produce pressed-glass beads. As a result, by the 1920s Czechs became the main bead exporters of the world.

I created a memory wire bracelet using turquoise Czech flower glass beads, jet Czech petal beads and tortoise Czech fire polished glass beads. For added detail, I added antique copper spacers. I picked these colors because I haven't seen these colors used together on jewelry. This bracelet can be worn dressed down with a white t-shirt, jeans, and flip flops, or dressed up with that "little black dress" you save for special occasions. Please leave questions and comments to let me know what you think!

Brianna

Brianna is our guest blogger for this Spring/ Summer season - welcome Brianna! Click here to send Brianna message or leave a comment.

Girlfriends & Beads

Beading is such a nice hobby to share with your friends and family. Last Saturday, my beautiful and awesome friends Brianna (our guest blogger), Bethany and I spent the afternoon beading and then went out for a delicious dinner. We talked, laughed and shared ideas.

Bethany made a precious pink lanyard to wear at her new job.

Brianna created a gorgeous Turquoise Flower Cuff Bracelet, see her blog post for details on making this bracelet for yourself (coming soon).

I created a gorgeous pendant necklace featuring a Thai silver rose pendant surrounded by gemstones, you can see it in this blog post: Rose Bouquet Necklace

Tell us how you have fun beading with your friends and loved ones, please leave a comment!

Rose Bouquet Necklace

This Thai silver rose pendant is absolutely exquisite. I wanted to create a sophisticated, garden inspired necklace featuring this rose in a cluster, surrounded by gorgeous gemstone beads that include blue topaz, pink topaz, chrysophrase and rhodonite.

To create this necklace, attach beads and charms to a piece of chains. The rose pendant is attached to the chain with a jump ring and all of the gemstone beads are wire wrapped and attached to the chain as well. I chose beads that were no larger than 6mm so that the rose pendant would remain the focal point of the piece.

When beads are wire wrapped and attached to chain, they dangle elegantly. Using this technique to attach beads to chain can also be used to create earrings.

If you are new to wire wrapping and want to learn how to wire wrap top drilled gemstone beads (mostly tear drop shaped briolettes with the holes drilled horizontally across the top), click here to see illustrated wire wrapping instructions on our Bead Bee website.

My First Bead Box

A few days ago, I discovered a dusty old tackle box while cleaning out a closet in my house - it was my first bead box.

When I first started beading, I was instantly addicted and this little plastic box filled up quickly and overflowed into a large basket, which then grew into a spare room in my house.

Here are some forgotten treasures that I found in my first bead box:

• Gray pearl daisy chain necklace
• Antiqued copper filligree components
• hanks of gorgeous Czech 15/0 seed beads
  

This little old box brought back all the memories of why I started beading, the eagerness to learn all about making jewelry, coming up with new jewelry designs and having fun discovering new beads and the ideas that they inspired. As I look back, I think of how lucky I am to still have the same passion about beading and jewelry design today.  What memories do you have about when you first started beading?

Large Link Chain Gemstone Briolette Necklace

This is a simply elegant necklace that will showcase gorgeous gemstone briolettes on sophisticated sterling silver links.

Create this necklace at loose choker length. This will allow the necklace to drape around the neck in a circular shape. Choose a larger link chain for added drama. The chain featured in this example has 12mm links. When cutting the chain, don't forget that the clasp that you choose will add about 1" to the total length of the necklace.

Next, select one briolette per chain link. You may choose to arrange the briolettes according to color and size before wire wrapping them onto the chain.

I have been saving these exquisite tourmaline briolettes and this project is perfect for them. The size of the large chain link is well proportioned to the 10mm briolettes and the rich color of the stones makes them the perfect beads to show off in this design.

If you want to use smaller briolettes or other shapes, you may choose to attach more than one bead to each chain link. The result will be just as stunning.

Here are several way to attach a clasp to the chain to complete the necklace:
1) Use open jump rings to attach your choice of a clasp
2) Use matching beads to wire wrap the clasp to the chain
3) Use a matching satin ribbon to tie the chain around your neck
4) Use a simple "S" hook - see photo below 

To purchase products featured in this blog post, please use these links:
Sterling Silver Chain
Gemstone Beads
S Clasp
Sterling Silver Wire

Gemstone Lariat Necklace

Here is a version of a lariat necklace that features gorgeous freshwater pearl bead strands sprinkled with multi-colored gemstone beads. An ornate sterling silver toggle serves as the focal point.

I really love the poetic combination of the rich gemstones in this necklace design. The pearls add to the classic style that can be dressed up or down. The gemstone beads used include: amethyst, pink chalcedony, green chalcedony, apatite, pink topaz, prehnite, london blue topaz and lemon quartz.

Lariat necklaces are typically designed to be long and graceful. Since I used small rice pearls, I chose to make this necklace two strands so that it would a little more dramatic.

Materials
Ornate Sterling Silver Toggle

Freshwater Rice Pearls

FlexRite Beading Wire

Sterling Silver Crimps

26 gauge Sterling Silver Wire

3 Sterling Silver ball pins

Gemstone Beads include Amethyst Tear Drop Beads, Pink Chalcedony Briolette Beads, Green Chalcedony Briolette Beads, Blue Apatite Rondelle Beads, Pink Topaz Rondelle Beads, London Blue Topaz Briolette Beads, Lemon Quartz Twist Briolette Beads

Instructions
You will need one 36" strand and one 38" strand of Flex-Rite beading wire (I used medium weight, however, a few of the pearls and gemstones didn't fit. I prefer to use medium weight for the strength and am willing to sacrifice a few beads in the process. However, light weight beading wire will work fine.

String beads in the desired pattern onto the flexible bead wire. One end of each strand should be attached and crimped to the toggle ring. The other ends should be thread through the toggle ring. (See Photo A, below)

Next, wire wrap your choice of larger size gemstones (8mm or larger) onto ball pins to create dangling beads. The wire wrapping will create loops above the beads so that they can be attached to the ends of each strand. (See Photo B, below)

Start with the unfinished end of one strand, string on a crimp bead, thread the beading wire through beaded dangles and crimp. Repeat with the second strand.

Related Posts:

How to Wear a Lariat Necklace

Simple Lariat Necklace (design idea)

How to Wear a Lariat Necklace

A lariat necklace is typically longer than most necklaces. It does not have a clasp and can be worn in many ways for different looks and can be adjusted to suit different pieces in your wardrobe or to fit different necklines. Here are a few suggestions on how to wear a lariat necklace:

1) Double Wrap - this is a great way to shorten the necklace and achieve a two strand look.

2) High Neck - wear the necklace closer to the neck for a dramatic look when wearing a low scoop neck. The long, graceful dangle can have a slimming affect and can add interest if you wear it with a simple dress.

3) Long V Neck - a more traditional necklace look, also very versatile, great with button down shirts, sleeveless tops, or turtlenecks.



Lariat necklaces are designed in many different ways, depending on how it is made, a lariat necklace can also be knotted, tied, or worn as a belt.

Related blog posts:
Gemstone Lariat Necklace (design idea)
Simple Lariat Necklace (design idea)

How to Choose the Right String for Beading

There are countless choices of stringing materials for beading, so how do you know which to choose? Your choice of stringing material is important because it can affect the look of your design as well as the strength, shape and structure. Here are 5 main stringing materials that I use the most:

Flexible Beading Wire is one of the most versatile types of stringing materials. It is a flexible beading wire made of stainless steel and covered with nylon, making it a nice combination of strength and flexibility. It works with most types of beads including glass, crystals and gemstones, and pearls and very is easy to finish by using just a few findings such as crimp beads, jump ring, lobster claw clasp and a crimp tool.

Flexible beading wire is available in several thicknesses, light, medium and heavy. For most projects, choose medium flexible beading wire with 49 strands. If you are using heavier beads, heavy weight beading wire may be a better choice. For gemstones or pearls with smaller holes than most beads, you may need to use light flexible beading wire because it is slightly thinner.

In order to attach a clasp or findings to flexible beading wire, you will need crimp beads, a crimp tool and a flush cutter. If you need help getting started with crimping, click here to get illustrated crimp bead instructions from our website.

Stretch Bead Cord or Elastic - For making stretch bracelets, you will need a type of stretch cording or elastic. There are many different types, colors and thicknesses. I have used many types and now favor the gossamer stretch cord that we carry at Bead Bee. It knots well and stretches well. There are some brands that barely stretch so they are not as easy to put on. Another type of stretch cord that is easy to use is a type often found in sewing shops, it is a rubber cording that is covered in polyester thread. When the cord is cut, the polyester thread will fray, but you can simply singe the ends. I like this type of elastic cording too because it is durable and the knots hold.

I love making and wearing stretch bracelets - you don't need clasps and findings, and sometimes it is nice for a bracelet to be beaded all the way around and not be interrupted by a clasp.

Memory Wire - Like stretch cord, memory wire does not require clasps and findings. You will need a special memory wire cutter and pliers to curl the ends to secure the beads. Memory wire is springy and maintains its round shape so a clasp is not required to fasten it on your neck or wrist.

Memory wire usually comes in a coil, you can cut it at any length to create single strand, bangle like bracelets, or cut more coils for multi-strand, cuff like bracelets. Simply curl the ends to keep the beads from falling off. Memory wire bead ends are also available, they are beads with one hole, that can be glued onto the ends of memory wire.

Wire - Beads can be strung on hard wire and head pins and linked together to create beaded chains. Wire wrapping techniques are necessary to do this. The tools needed for wire wrapping include round nose pliers, a flush cutter, chain nose pliers and a flat nose plier with tip.

Chain - Chain is not really a stringing material, but using chains and wire to wire wrap beads together can create beautiful designs. Beads can be strung directly onto chain such as ball chain or snake chain.

We are happy to help you choose the right materials and techniques for your project so feel free to call or email us, you can even include pictures to assist in answering your questions.





Related Posts:
Soft Flex or Flex Rite? 
Brilliant Beaded Bracelets
Memory Wire Bangle Charm Bracelet
Attaching Clasps to Fine Chain

Modern & Simple: Sterling Silver Tube Beads

Sterling silver tube beads are the perfect spacers for larger size beads. They provide a more modern look and will allow the gorgeous beads that you pick to stand out in your jewelry.

Sterling silver tube beads are available in many lengths and thicknesses. They can be straight, curvy or wavy

In this example, I used a sterling silver heishi bead on each side of the glass beads for added detail.

This piece was strung on medium weight Flex Rite beading wire and finished with a simple lobster claw clasp.

To purchase materials featured in this blog post, please use these links:
Sterling silver tube beads
Flex Rite beading wire
Lobster claw clasps

My Favorite Things Charm Necklace

My great great grandma and her family had come to the U.S. all the way from Czechoslovakia when she was a young girl. Knowing this, I have always been really interested in all things Bohemian, especially jewelry. My first Bohemian inspired piece is what I'd like to share with you in this blog.

My mom and I were in a beading store and the first thing the caught my eye was a glass bead in the form of a globe. I then found a beautiful bronze bead cap for the globe, matching chain and a clasp. To add more color, I incorporated four small glass beads that shared the same colors as the globe bead. I also chose antiqued charms that represent things I like - they help express my personality in the necklace.

To make your own charm necklace, find a component to serve as the focal point, this can be a large toggle or bead. Gather your favorite beads and charms, and use wire wrapping to attach them to the ends of multiple pieces of chain to create a tassel that attaches to the focal point.

You may be surprised what you can scavenge from your bead box or parts from your old or broken jewelry. Another place I like to look is thrift stores or consignment shops where there's an array of unique pieces to choose from. The possibilities are endless, just follow your creativity wherever it takes you!

Brianna is our guest blogger for this Spring/ Summer season - welcome Brianna! Click here to send Brianna message or leave a comment.

Create Your Own Stylish Stretch Bracelets

Stretch bracelets make fabulous accessories because they are simple to make and don't require any findings or hardware. As far as the stringing material, there are many types of elastic cording and based on my experience, I prefer two types that stretch well and knot well. I have found others don't hold the knot or do not have very much stretch.

One type is the gossamer stretch cord. This is a fiberous, rubbery cording that stretches well and knots well. It is thin will work with most types of beads. The recommended type of knot for finishing this cord is a surgeon's knot. I have never used glue on my knots, but you may if you like.

The second type is an elastic cord commonly found in sewing shops. This is a rubber elastic that has been wrapped in polyester thread. This type of cord often comes in many colors and thicknesses.

Stretch bracelets are also recommended for kids crafts if you don't want to worry about adding a clasp. Elastic cord can be used to create necklaces as well, just make sure the necklaces are long enough to fit over the head without overstretching.

If you are concerned about the strength, quality stretch cord will not break too easily, however, it is not unbreakable. Stretch bracelets should not be worn during physical activity or in any situation where the bracelets are likely to get caught or pulled. You can also reinforce stretch bracelets by using two or three strands of cording. The hole sizes in the beads will have to be large enough to fit the multiple strands, also note that the more strands you use, the less the bracelet will stretch due to the increased resistance of the multiple strands.

Note: Beaded stretch bracelets should also not be given to young children who may choke on small parts should a bracelet or necklace break apart.

Photo: A simple stretch bracelet design using plastic pony beads and plastic alphabet beads, created for a Relay For Life fundraiser.

We would love to help you put together a fun stretch bracelet project for you so please give us a call.

To purchase materials featured in this blog post, please use these links:
Gossamer stretch cord
Plastic pony beads
Plastic alphabet beads

How to Use Cones to Finish Beaded Necklaces

When creating a multi-strand necklace, using cones can be an elegant way to bring all the strands together and finish the necklace. With good wire-wrapping, a clasp can be neatly attached for a well crafted look.

In order to use cones to finish the ends of a multi-strand beaded necklace, you will need to wire wrap a loop onto one end of a piece of 24 gauge wire. All the strands will be crimped onto this loop. Then insert the wire through the cone and wire wrap the end of the wire onto the clasp. The second end can be attached to a jump ring or extender chain.

Cones are available in many different styles. Some may be plain and simple, others will be ornately decorated. You will have several options so that you can choose cones that enhance the style your beaded creations.

Tips to Improve Your Wire Wrapping

Good craftsmanship adds exceptional quality to any handmade item, bad craftsmanship can simply ruin your hard work. Here are some simple tips to help you improve your craftsmanship and the overall quality of your handmade projects.

Perfect Wire Wrapping does not require any special talent, just practice good technique and use the right beading tools.

Wire Wrapping Tip #1: When creating wire wrapped loops, don't forget to make a 90 degree bend before making the loop. This helps prevent crooked loops and lopsided dangles.

Wire Wrapping Tip #2: When creating wire wrapped coils, take it slow and have a steady, firm hand. You will have more control and be able to create nicer and tighter coils. You can also use a second pair of chain nose pliers to ensure tight, parallel coils -  see our wire wrapping video for more details.

Wire Wrapping Tip #3: A pair of flat nose pliers with tip will help tidy up your wire wrapping. The narrow tips are perfect for getting into tight spots.

Wire Wrapping Tip #4: To prevent nicks and scratches on your wire, avoid an overly heavy hand. You will need to be firm, but squeezing with all your might will definitely mar your work.

You can also use Tool Magic to coat your tools as another safeguard from unsightly marks on your wire work.

To purchase products featured in this blog post, please use these links:
Tool Magic
Flat nose pliers with tip

Ravishing Ribbon and Beads

The look of fibers and beads can be edgy or sophisticated depending on your choice of colors and materials. Our example features a soft, romantic look created from beads on headpins, attached to jump rings knotted onto a creamy, satin ribbon. This type of necklace does not require a clasp and is adjustable in length. Simply tie around the neck at the desired length. However, if you would like to have a more structured closure, it is very simple to attach chains and findings to complete this necklace.

If you can wire wrap, then this will be a simple piece to create in less than an hour (depending on how many beads you use).

Materials
3/16" satin ribbon
8mm closed jump rings (open jump rings will work, but closed jump rings are preferred to prevent snagging the ribbon)
Beads - your choice, choose beads that are 8mm and smaller to keep the look light and flirty. My example includes 8mm Luster Blue Czech Firepolished beads, 6mm Milky Aquamarine Czech Firepolished Beads and 4mm Light Smokey Quartz Firepolished beads.

Instructions

Determine the length of your necklace, then decide where you would like to knot in beads, this may be every 3-4". At each of these spots, knot a jump ring into place. Next, attach 3-5 beads to each jump ring. This necklace can be composed of a single strand or multiple strands of ribbon. Our example shows two strands at slightly different lengths. No clasp is needed, simply tie around neck at desired length.

If you would like to attach chains and clasp, loop one end of the ribbon around an 8mm jump ring. Hand-stitch the ribbon to secure the jump ring. Repeat on the other side. Next, attach a piece of chain to each jump ring, this will allow you to adjust the length of the necklace. Lastly, attach a lobster claw clasp.











To purchase the materials featured in this post, please use these links:
Luster blue Czech fire polished beads
Milky aquamarine 6mm Czech Beads
Light smokey quartz Czech beads
Sterling silver head pins

Why I Bead

Hello everyone :)

I've been sitting, pondering what to write about, and then I figured blogging is all about the first thing that comes to your mind. Before I get into detail about jewelry I've made and sharing my ideas, I just wanted to talk about the reason I love beading so much.

First of all, jewelry is such huge part of pulling an outfit together in the fashion world. It can take something as plain as a t-shirt, jeans, and flats, and turn it onto something that's really trendy and eye catching. Since I'm into both art and fashion, I'm attracted to all the different shapes and colors in beads, in combination with the colors and textures of clothes.

Also, whenever I used to go shopping for jewelry, one piece (such as a necklace or bracelet) could clear my whole wallet. When making my own jewelry, I realized the amount it costs to purchase the beads is at least 40%, if not more, cheaper. If I need something for an event, I can coordinate my jewelry to go with a specific outfit I want to wear. This saves me the time I could waste searching for that "wow factor" piece, only to end up settling for something I'll only wear once.

One more reason I enjoy making jewelry is that it's a great way to give gifts and people will know you put thought and heart into. Last Christmas, instead of battling overcrowded malls, I decided I would make all of my friends and loved ones a piece of jewelry that they would cherish. There's nothing that makes me happier than seeing the reactions on their faces when they pull out a necklace or bracelet that was designed just for them.

So, the next time you want a new jewelry set or you need to find your friend a perfect pair of earrings, remember that only you have the ability to make them the exact way you want them to be made!

Brianna is our guest blogger for this Spring/ Summer season - welcome Brianna! Click here to send Brianna message or leave a comment.

Beads of Natural Beauty

Harness the natural beauty of wood and gemstone beads. They can be combined to create a chic bohemian look that can be both casual and sophisticated. In my example, the rich, brown tiger ebony wooden beads are complimented by the multi-colored jade beads. To achieve a finer look with wooden beads, choose rich colors, smooth, polished beads and clean shapes.

You can also test out different combinations such as wood and crystal, glass or other gemstones. This will be a great opportunity to add color and interest to your design. Incorporating sterling silver or gold will add a more formal look

Brilliant Beaded Bracelets

I enjoy using Czech glass fire polished beads in my jewelry designs because there are so many choices of shapes, sizes and colors. The Pantone Spring 2010 Color Report has inspired this set of four multi-colored glass bead bracelets. The Pantone Spring color palette identifies "Fusion Coral" as one of the colors which lead me to the pink coral Czech glass donut beads pictured above. I wanted to create a fun, bright set of bracelets in different colors so I also chose "Turquoise" and "Aurora" from Pantone's color palette. To complete the set, I used a milky baby blue bead, not one of the colors in the palette, but still complimentary.

These can be worn all at once to add color to solid fabrics in your wardrobe. The beaded bracelets can also be worn with gold or silver bangles for added style

I strung all these beads onto gossamer stretch cord using a large eye needle. For spacer beads, I used a mix of White Toho Seed Beads.

What colors are your favorites this season?

To purchase the materials featured in this post, please use these links:
Milky Aquamarine 6mm Czech Beads
Crystal Czech glass gemstone donuts
Turquoise Green Czech glass gemstone donuts
Pink Coral Czech glass gemstone donuts
White Toho Seed Beads
Gossamer stretch cord
Large eye needle

Immerse Yourself in Radiant Spring Colors

In contrast to deep, rich, fall colors, this season’s colors of style are upbeat, yet rich and soothing. For Spring 2010, Pantone has coined these colors for the season:

Turquoise, Tomato Puree, Fusion Coral, Violet, Tuscany, Aurora, Amparo Blue, Pink Champagne, Dried Herb and Eucalyptus.

Knowing the current colors of the season is important so that the jewelry you create coordinates with current fashions and also allows you to upgrade your existing wardrobe. Be inspired to create your own color palette based on your personal style.

Beading offers a huge material palette so you are sure to find the colors and shades that you are looking for in Czech glass beads, Swarovski crystal beads, gemstone beads or pearl beads.

Tomorrow I will post my first piece of jewelry inspired by this season’s colors.

How will the Spring colors inspire you?

If you are obsessed with color like I am and are interested in learning more about Pantone, go to www.pantone.com.

Simple Lariat Necklace

A lariat necklace is a stylish and unique design resembling a noose. Most designs are adjustable, but variations can be clasped in the front. My example does not require any findings except for two crimp beads and some wire. If you chose to use a clasp, a large, ornate toggle is a nice option.

The overall length is about 36" long. I chose a neutral palette of golden peach freshwater pearls, and brown and copper beads of Czech glass and Swarovski crystals. These neutral tones help highlight the wooden centerpiece and the fuchia jade pendant, which provides a dramatic touch of color.

I chose the wooden donut as the centerpiece for this necklace. The hole is large enough for two strands of beads to pass through comfortably. One end of the necklace is permanently attached to the donut (photo shows one end of the beaded strand is looped around the donut and crimped, smaller beads are used on this end).


To make this necklace, string all the beads onto flexible beading wire. I recommend using smaller beads on the end that will wrap around the donut. It is good to use beads that vary in shape and size, if your necklace is too uniform in size, it will not "catch" on the donut and stay in place.

After stringing on all the beads, wrap one end around the donut and crimp in place. Then insert the second end through the donut. Add any additional accent beads and a pendant to finish the necklace.

This necklace is adjustable in length by adjusting the location of the centerpiece. Since making this piece, I have created other variations and will share them in future posts.

Related blog post:
Gemstone Lariat Necklace (design idea)

Two Tier Beaded Necklace

Combine the look of a choker and a long elegant beaded strand into a single necklace that you can wear for work or play. My example features beaded strands made from large white freshwater pearls, sky blue coral 8mm Czech glass fire polished beads, 6mm crystal Czech fire polished beads and 6x9mm crystal Czech fire polished donuts, accented with Toho seed beads.

The contrast between the short and long strands create a dramatic aesthetic that can be worn with a collared shirt and blazer or a fabulous scoop neck dress. The random pattern of the beads keeps it playful and romantic.

To create this necklace, string two strands of beads onto two different lengths of flexible beading wire such as Soft Flex or Flex Rite. With a crimp tool, crimp each strand to jump rings and a clasp.

For an ultra feminine touch, in lieu of a clasp, I finished this piece with a silky cream ribbon  that ties around the neck. Click here for ideas on using ribbon in your jewelry designs.

To purchase the materials featured in this blog post, please use these links:
Flexible beading wire 
Sky blue coral Czech glass beads 
White mix Toho seed beads

How to Make a Nursing Bracelet

Nursing bracelets are a wonderful gift for the mother of a newborn. Not only are they stylish, they are also functional. These bracelets are a helpful tool for a nursing mother to remember the time of the next feeding.
Each bracelet contains the numbers of a clock. The three beads following the number each represent a quarter of an hour. A movable charm attached to a lobster claw clasp is clipped in place to designate the time of the next feeding.

The beads of this bracelet are strung onto memory wire so it is easy to put on and take off. This way, nursing mothers can also switch wrists according to which side she is to nurse from at the next feeding.

To create this bracelet, you will need: memory wire, number beads, spacer beads (example above features Czech Glass fire polished beads and sterling silver stardust beads), a lobster claw clasp and a charm. However, in my example, I attached a Swarovski crystal butterfly bead onto the lobster claw claps using a head pin.

The number beads you will need are a set of 15: five "1" beads, two "2" beads and one each of number 0 and 3-9.

We offer the number beads in a pre-counted set so you don't have to worry about ordering each number individually.

Number beads are available in white plastic, rhodium plated pewter and gold plated pewter.

Helpful Tips
1) Make sure you have a memory wire cutter, memory wire will damage other cutters that are not designed to cut memory wire

2) After you determine the approximate length of your bracelet, cut the appropriate length of memory wire, add extra length for margin of error.

3) String the beads in sequence from bottom of the coil and push the beads to the top. Otherwise, if you start from the top and push the beads down to the bottom, the bracelet will be backwards.

Make Your Own Head Pins

Making your own "head pins" is a great way to use scraps of wire.

When making your own head pins, you will actually be making an eye pin by creating a loop at the end of the wire which will serve as the "head". This technique creates a different look than ready made head pins and can be intentionally used as a design element.

I created earrings by dangling beads onto handmade pins that accent each bead with small delicate loops.

You can create the loops as large or small as your like, as long as they will hold the beads. You can also get creative by making swirls and other designs for added detail. You can use this technique to add beads to chains, and create bracelet and necklaces.

Tie It All Together: Beads & Ribbon

Soft materials like ribbon, leather and suede are a nice way to add a unique touch and a softer look to your handmade jewelry. Here are some simple ideas to incorporate ribbon and other fibers into your designs:

*Use ribbon to serve as a closure for chained necklaces or bracelets. The ribbon tie closure is especially convenient because it makes the jewelry adjustable in length. This technique is easy, simply string the ribbon through each end of the chain and tie around your wrist or neck.

*Strands of beads can be crimped and attached to ribbon, suede or leather.

*Color coordinated ribbon bows can add an adorable touch to a simple piece of jewelry.

*Knot beads and charms onto ribbon for a soft, feminine look. (Click here for more details on creating this look).

I love using ribbon in my jewelry designs, the look is ultra feminine, romantic and simply beautiful! There will be more ribbon jewelry designs to come.

Related posts about using ribbon in jewelry making:
"Alphabet Beads for Grown Ups"
"Ravishing Ribbon and Beads" 

Make Your Own Lanyard with Beads

If you are required to wear an ID bagde daily, use this as an opportunity to enhance your work attire by creating stylish lanyards that express your unique personality.

For a simple design that is easy to make, use seed beads accented with a few larger beads in a pleasing pattern. Using more smaller beads (seed beads) keeps the lanyard from getting too heavy and also avoids clashing and competing with the other jewelry & accessories you may wear. In my examples, I used Toho seed beads, and Czech glass beads. For stringing material, use 49 strand, .024" flexible beading wire for added strength. You will also need sterling silver crimp beads, split rings and lanyard hooks or key rings.

Create a lanyard with a neutral color palette that can match most of your wardrobe, or have fun creating several lanyards in your favorite colors to match different outfits. You can also create lanyards with school colors, the colors of your favorite sports team, or company colors. The possibilities and color combinations are endless. Add charms to your lanyard for further personalization or use our popular alphabet beads to spell your name or other personalized message.

Beaded lanyards will transform your I.D. badge into a beautiful piece of jewelry that compliments your professional wardrobe. Whether you work at a school, hospital, or corporate office, a beaded lanyard is the perfect work accessory.

Attend a Lanyard Design Make & Take Workshop at Bead Bee - See workshop schedule

All Mixed Up - Mixed Media Bracelet

A great way to use left over beads from previous projects is to incorporate a mixed media strategy which involved a simple strategy of combining different types of materials to create jewelry. You can achieve beautiful results buy combining glass, pearls, metal and gemstones and create jewelry that is unique, versatile and can compliment many different outfits.

If you have a collection of "orphaned" beads or leftovers waiting to be incorporated into the right project, this is a great way to gather them all together.

Our example features Swarovski crystals, freshwater pearls in different shades of purple, violet, peach and crystal. Different sizes and shapes were used as well. There are no rules when creating mixed media jewelry. Simply experiment and play around with different combinations of shapes, sizes and colors until you discover something that you like. The key is to just try it out even if you don't think it will look good together, this will allow you to discover unexpected, yet pleasing combos. Then string it all onto a necklace or bracelet in a random pattern.

Photographing Your Jewelry: Inspiration

I frequently receive emails from people who share their projects with me. I always love to see what they do with beads that they purchase from Bead Bee. My friend Carolyn recently sent me photos of her latest work. I met her last year when she took a beginner's beading class at my store - she is very sweet and talented.

I wanted to share her photos with you because her jewelry is very beautiful, but the photography is just as striking because she has uses nature as inspiration in composing her images.

Please visit Carolyn's Etsy store at: JewelsByCarolyn

Bringing You Blue Skies & Florida Sunshine!

Right now it is 48 degrees here in Orlando, FL - here we think it's cold, but I know that many of your are braving much, much colder conditions of wind, rain, snow, and gray skies.

We wish we could share our blue skies and Florida sunshine with you, since we can't, enjoy this photo and coupon. You can use it when you shop online, order by phone, or visit our store.

How are you keeping busy with beads? Please let me know by sharing your comments!

Bead Bee Coupon
Get 10% off any purchase of $36 or more
Use Coupon Code at checkout: BEADBEEBLOG02XF
Expires 2/28/10. Coupon can be used online, for phone orders or in our store. Coupon is valid only on in-stock items and cannot be combined with other offers. Coupon is not valid on previous purchases

Start shopping now at www.beadbee.com

Dazzled by Swarovski Crystals in NYC

I had the chance to visit the Swarovski Crystallized Concept store in NYC. It was like stepping into a 3 dimensional Swarovski crystal bead catalog. Every Swarovski bead in every color was on display. It was a great opportunity for me rediscover all the shapes and colors and see the new designs and colors of  Swarovski crystal beads.

There was finished jewelry on display as well which was just as inspiring. If you ever has a chance to visit the store, you definitely should, you will be mesmerized by all the gorgeous crystal beads.

My experience inspired several pairs of dazzling Swarovski crystal earrings, cascading from simply elegant sterling silver ear wires.

Theses earring as simple to make if you know how to wire wrap. The only materials you need are ear wires, head pins and crystal beads. There are endless combinations of colors and shapes.